GB/T 2951.21-1994
Test method for determining mechanical and physical properties of electric cables and wires. Flexing test for flexible cables and wires
- Standard No.
- GB/T 2951.21-1994
- Language
- Chinese
- Release Date
- 1994
- Published By
- General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China
- Lastest
- GB/T 2951.21-1994
- Replace
- GB 2951.21-1982
- Scope
- This standard specifies the test equipment, sample preparation, test procedures, test results and calculations for the flexural test of flexible wires and cables. This standard applies to the determination of the dynamic flexural properties of rubber, plastic insulated and sheathed flexible wires and cables under load. This standard does not apply to the following products: single-core flexible cables and flexible wires; flexible wires with flattened copper wire as the conductive core; rubber insulated and sheathed flexible wires and cables with an outer diameter greater than 18.0mm; outer diameter greater than 13.0mm Plastic insulated and sheathed flexible wires and cables. The general provisions and definitions of mechanical and physical performance tests of wires and cables, and the periodic calibration of test equipment are specified in GB/T2951.1.
GB/T 2951.21-1994 history
- 1994 GB/T 2951.21-1994 Test method for determining mechanical and physical properties of electric cables and wires. Flexing test for flexible cables and wires
- 0000年 GB 2951.21-1982
GB/T 2951.21-1994 -All Parts
GB/T 2951.1-1997 Common test methods for insulating and sheathing materials of electric cables. Part 1: Methods for general application. Section one: Measurement of thickness and overall dimensions--Tests for determining the mechanical properties
GB/T 2951.10-1997 Common test methods for insulating and sheathing materials of electric cables. Part 5: Methods specific to filling compounds. Section one: Drop-point--Separation of oil--Lower temperature brittleness--Total acid number--Absence of corrosive components--
GB/T 2951.11-2008 Common test method for insulating and sheathing materials of electric and optical cables.Part 11:Methods for general application.Measurement of thickness and overall dimensions.Tests for determining the mechanical properties
GB/T 2951.12-2008 Common test methods for insulating and sheathing materials of electric and optical cables.Part 12:Methods for general application.Thermal ageing methods
GB/T 2951.13-2008 Common test methods for insulating and sheathing materials of electric and optical cables.Part13:Methods for general application.Measurement for determining the density.Water absorption tests.Shrinkage test
GB/T 2951.14-2008 Common test methods for insulating and sheathing materials of electric and optical cables.Part 14:Methods for general application-Test at low temperature
GB/T 2951.2-1997 Common test methods for insulating and sheating materials of electric cables. Part 1: Methods for general application. Section two: Thermal ageing methods
GB/T 2951.21-2008 Common test methods for insulating and sheathing materials of electric and optical cables.Part21:Methods specific to elastomeric compounds.Ozone resistance,hot set and mineral oil immersion tests
GB/T 2951.23-1994 Test method for determining mechanical and physical properties of electric cables and wires. Bending test
GB/T 2951.24-1994 Test method for determining mechanical and physical properties of electric cables and wires. Test for copper naphthenate content of protective coverings
GB/T 2951.25-1994 Test method for determining mechanical and physical properties of electric cables and wires. Test for anaerobe-corrosion of protective coverings
GB/T 2951.26-1994 Test method for determining mechanical and physical properties of electric cables and wires. Saline bath test
GB/T 2951.27-1994 Test method for determining mechanical and physical properties of electric cables and wires. Corrosion spread test
GB/T 2951.28-1994 Test method for determining mechanical and physical properties of electric cables and wires. Test for abrasion of extruded oversheaths
GB/T 2951.3-1997 Common test methods for insulating and sheathing materials of electric cables. Part 1: Methods for general application. Section three: Methods for determining the density--Water absorption tests--Shrinkage test
GB/T 2951.31-2008 Common test methods for insulating and sheathing materials of electric and optical cables.Part31:Methods specific to PVC compounds.Pressure test at high temperature.Test for resistance to cracking
GB/T 2951.32-2008 Common test methods for insulating and sheathing materials of electric and optical cables.Part32:Methods specific to PVC compounds.Loss of mass test.Thermal stability test
GB/T 2951.34-1994 Test method for determining mechanical and physical properties of electric cables and wires. Tear test
GB/T 2951.37-1994 Test method for determining mechanical and physical properties of electric cables and wires. Test for oxidative inductive time
GB/T 2951.38-1986 Termite test mothods for wires and cables
GB/T 2951.4-1997 Common test methods for insulating and sheating material of electric cables. Part 1: Methods for general application. Section four: Test at low temperature
GB/T 2951.41-2008 Common test method for insulating and sheathing materials of electric and optical cables.Part 41:Methods specific to polyethylene and polypropylene compounds.Resistance to environmental stress cracking.Measurement of the melt flow index.Carbon black and/o
GB/T 2951.42-2008 Common test methods for insulating and sheathing materials of electric and optical cables.Part 42:Methods specific to polyethylene and polypropylene compounds.Tensile strength and elongation at break after conditioning at elevated temperature.Wrapping tes
GB/T 2951.5-1997 Common test methods for insulating and sheathing materials of electric cables. Part 2: Methods specific to elastomeric compounds. Section one: Ozone resistance test--Hot set test--Mineral oil immersion test
GB/T 2951.51-2008 Common test methods for insulating and sheathing materials of electric and optical cables.Part51:Methods specific to filling compounds.Drop point.Separation of oil.Lower temperature brittleness.Total acid number.Absence of corrosive components.Permittivit
GB/T 2951.6-1997 Common test methods for insulating and sheathing materials of electric cables. Part 3: Methods specific to PVC compounds. Section one: Pressure test at high temperature--Test for resistance to cracking
GB/T 2951.7-1997 Common test methods for insulating and sheathing materials of electric cables. Part 3: Methods specific to PVC compounds. Section two: Loss of mass test--Thermal stability test
GB/T 2951.8-1997 Common test methods for insulating and sheathing materials of electric cables. Part 4: Methods specific to polyethylene and polypropylene compounds. Section one: Resistance to environmental stress cracking--Wrapping test after thermal ageing in air--Mea
GB/T 2951.9-1997 Common test methods for insulating and sheathing materials of electric cables. Part 4: Methods specific to polyethylene and polypropylene compounds. Section two: Elongation at break after pre-conditioning--Wrapping test after pre-conditioning--Wrapping