SAE AS5728-2009 AMS 7268材料制O型密封圈模塑預成型包裝

This standard establishes the dimensional and visual quality requirements and packaging and labeling requirements for O-Rings molded from AMS 7268 rubber. It shall be used for procurement purposes.

Packing, Preformed, O-Ring Molded from AMS 7268 Material

AECMA PREN 6094-2007 航空航天系列.墊圈彈簧埋頭釘.P2版

This draft is now available for public comment and your views and technical comments on it would be appreciated. If you have no specific comments to make hut find it generally acceptable it would be helpful if you would notify US accordingly. Suggestions entailing revision of the text should indicate the preferred wording. Please quote the relevant clause number against any comment.

Aerospace series Washer, spring, countersunk Edition P 2

AECMA PREN 4632-001-2007 航空航天系列.焊接和釬焊組件 飛機構架材料可焊性和可釬焊性.第001部分:一般要求.P1版

This standard specifies the required characteristics for lamp, code 1619, used on-board aircraft. It shall be used together with EN 2756.

Aerospace series Welded and brazed assemblies for aerospace constructions Weldability and brazeability of materials Part 001: General requirements Edition P1

AECMA PREN 6091-2006 航空航天系列.簧環.P1版

This standard specifies the dimensions, tolerances, required characteristics and masses of a circlip for use in fuselage interior equipment and structural applications. This standard shall be used in conjunction with stud per EN 6088 and retaining washer per EN 6089.

Aerospace series Circlip Edition P 1

NAVY MIL-STD-792 F-2006 特殊元件鑒定標記需求

The purpose of this standard is to provide general requirements for the marking of raw materials, products and components.

IDENTIFICATION MARKING REQUIREMENTS FOR SPECIAL PURPOSE COMPONENTS

DLA MS27985 REV B VALID NOTICE 3-2005 漏斗脖紐扣頭型6型彈簧扣件

The activities above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at http://assist.daps.dla.mil

FASTENERS, SNAP, STYLE 6 (FUNNEL NECK BUTTON HEAD TYPE)

DLA MS27979 REV C VALID NOTICE 3-2005 防泥型窗簾IB彈簧扣件

The activities above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at http://assist.daps.dla.mil

FASTENER, SNAP, STYLE IB (MUD-PROOF CURTAIN TYPE)

DLA MS27977 REV D VALID NOTICE 2-2005 大窗簾型1型彈簧扣件

The activities above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at http://assist.daps.dla.mil

FASTENER, SNAP, STYLE 1 (LARGE CURTAIN TYPE)

DIN EN 4420:2004 航空航天系列.合金鋼FE-PA3903制有彈簧張力的卡箍

This standard specifies the characteristics of spring tension clips for the support of electrical harnesses, in FE-PA3903 for aerospace applications. Maximum operating temperature: 250 ?,,#

Aerospace series - Clips, spring tension, in alloy steel FE-PA3903; German and English version EN 4420:2003

SAE AS24585B-2003 螺旋耐壓彈簧:適于20磅以下的荷載

SPRING, HELICAL, COMPRESSION: FOR LOADS BELOW 20 POUNDSTABLE 1 - CORRECTION FACTOR FOR STRESS RANGE LIFE CYCLES AND SPRING MATERIALTABLE 2 - DIMENSIONS AND CHARACTERISTICS TABLE 2 - CONTINUED

SPRING, HELICAL, COMPRESSION: FOR LOADS BELOW 20 POUNDS

HB 8292-2002 壓縮彈簧和拉伸彈簧規范

本規范規定了壓縮彈簧和拉伸彈簧的技術要求 ，質量保證規定和交貨準備。 本規范適用于工作溫度為常溫和溫度不超過 500℃ 高溫的彈簧的制造和驗收。

Specification for compressed spring and tensile spring

HB 8291-2002 壓縮彈簧

本標準適用于預加強處理的彈簧及其相應的檢查和試驗方法。

Compression spring

HB 8284-2002 彈簧按鈕

本標準適用于扣緊蒙布、蓋等物。

Spring button

HB 8286-2002 圓形彈簧卡圈

本標準規定了 形彈黃卡圈的結構、尺寸要求。 本標準適用于掖壓裝置殼體上安裝用的濾芯蓋、斷流活門的肯定。

Circle spring clamp hoop

NAVY QPL-24702-6-2001 一次性液壓過濾元件的一般規格(米制)

This list has been prepared for use by or for the Government in the acquisition of products covered by the subject specification and such listing of a product is not intended to and does not connote endorsement of the product by the Department of Defense

FILTER ELEMENTS, HYDRAULIC, DISPOSABLE, GENERAL SPECIFICATION FOR (METRIC)

AECMA PREN 4585-2000 航空航天系列.夾彈簧張力技術規范.P1版

This "Aerospace Series" Prestandard has been drawn up under the responsibility of AECMA (The European Association of Aerospace Industries). It is published on green paper for the needs of AECMAMembers. It has been technically approved by the experts of the concerned Technical Committee following comment by the Member countries.

Aerospace Series Clips, Spring Tension Technical Specification Edition P 1

AECMA TR 4586-2000 航空航天系列.夾彈簧張力設計建議.第1版

This Technical Report was drawn up by the Technical Committee C 8 of the AECMA Standardization Committee.

Aerospace Series Clips, Spring Tension Design Recommendations Edition 1

AECMA TR 4587-2000 航空航天系列.夾彈簧張力組裝建議.第1版

This Technical Report specifies the conditions of installation of spring clips for aerospace applications.

Aerospace Series Clips, Spring Tension Assembly Recommendations Edition 1

AECMA PREN 4590-2000 航空航天系列.固定器彈簧金屬片自動鎖螺母抗腐蝕鋼鈍化.P1版

This 'Herospace Series" Prestandard has been drawn up under the responsibility of AECMA (The European Association of Aerospace Industries). It is published on green paper for the needs of AECMAMembers. It has been technically approved by the experts of the concerned Technical Cornmittee following comment by the Member countries.

Aerospace Series Retainers, Spring, Sheet Metal, for Self-Locking Barrel Nuts, in Corrosion Resisting Steel, Passivated Editino P 1

AECMA PREN 4420-1999 航空航天系列.夾彈簧張力合金鋼FE-PA3903 E.P1版

This "Aerospace Series" Presfandard has been drawn up under the responsibility of AECMA (The European Association of Aerospace Industries). It is published on green paper for the needs of AECMA-Members. It has been technically approved by the experts of the concerned Technical Committee following comment by the Member countries.

Aerospace Series Clips, Spring Tension, in Alloy Steel FE-PA3903 Edition P 1