GB/T 16992-1997 飛機維護及其安全警告標志

本標準規定了飛機上使用的維護及其安全警告標志（不包括單純的文字標志），適用于各種類型的民用飛機。由于飛機維護點的尺寸和分布不同，采用本標準時，可以靈活執行本標準的要求。 本標準規定的標志以國際通用和易于識別為原則，為飛機地面作業提供方便，并為保障維護安全提出警告。

Aircraft--Identication of servicing, maintenance, ground handling and safety/hazard points

JIS W 8301:2016 航空用地面信號燈和色標

Aeronautical ground light and surface marking colours

SAE AIR5645A-2014 JAUS 傳輸注意事項

This SAE Aerospace Information Report (AIR) discusses characteristics of data communications for the Joint Architecture for Unmanned Systems (JAUS). This document provides guidance on the aspects of transport media, unmanned systems and the characteristics of JAUS itself that are relevant to the definition of a JAUS transport specification.

JAUS Transport Considerations

CFR 14-235.3-2014 航空和航天. 第235部分:航空公司涉及動物的航空運輸事件報告. 第235.3節:航空公司涉及動物的航空運輸事件的報告.

(a) Each covered carrier shall, within 15 days after the end of the month to which the information applies, submit to the United States Department of Transportation’s Aviation Consumer Protection Division a report on any incidents involving the loss, injury, or death of an animal during air transport provided by the air carrier, including incidents on flights by that carrier that are operated with aircraft having 60 or fewer seats.

Aeronautics and space. Part235:Reports by air carriers on incidents involving animals during air transport. Section235.3:Reports by air carriers on incidents involving animals during air transport.

SAE AS83461/2A-2014 O型圈MS83461型預制直螺紋管接頭包裝件

O-RING M83461 STRAIGHT THREAD TUBE FITTING BOSS

HB 8396-2013 民用飛機內外部應急標識

本標準適用于民用飛機的內外部應急標識。

Emergency signs inside and outside of civil aircraft

DIN EN 4817:2012 航空航天系列.航空器用無源超高頻無線射頻識別(UHF RFID)標簽.德文和英文版本EN 4817-2012

Aerospace series - Passive UHF RFID tags intended for aircraft use; German and English version EN 4817:2012

DIN EN 4818:2012 航空航天系列.航空器用高頻射頻識別(HF RFID)標簽.德文和英文版本EN 4818-2012

Aerospace series - Passive HF RFID tags intended for aircraft use; German and English version EN 4818:2012

DIN EN 4819:2012 航空航天系列.航空器用接觸式記憶鈕(CMB)標簽.德文和英文版本EN 4819-2012

Aerospace series - Contact Memory Button (CMB) tags intended for aircraft use; German and English version EN 4819:2012

SAE AS3084A-2012 預成型包裝.AMS 7280.密封

This document has been declared "Stabilized" and will no longer be subjected to periodic reviews for currency. Users are responsible for verifying references and continued suitability or technical requirements. New technology may exist.

Packing, Preformed - AMS 7280 - Seal

BS EN 4819:2012 航空航天系列.航空器用接觸式記憶口塞(CMB)標簽

Aerospace series. Contact Memory Button (CMB) tags intended for aircraft use

BS EN 4817:2012 航空航天系列.飛機用無源超高頻無線射頻識別(UHF RFID)標簽

Aerospace series. Passive UHF RFID tags intended for aircraft use

BS EN 4818:2012 航空航天系列.飛機用無源高頻無線射頻識別(HF RFID)標簽

Aerospace series. Passive HF RFID tags intended for aircraft use

ASTM D4306-12 受痕量雜質影響的試驗用航空燃料采樣容器標準規程

General descriptions for the manual sampling of petroleum products are given in Practice D4057. However, a number of aviation fuel properties are established or affected by trace levels of polar or other compounds. Measurement significance therefore requires that the sample containers not add or adsorb any materials. This practice presents types and preparations of sampling containers found satisfactory for the determination of water separation, copper corrosion, electrical conductivity, thermal stability, lubricity, and trace metal content. An approval procedure for new containers is also given. Two properties, particulate contamination and free water content, involve materials easily removed by any sampling container. These properties should be determined by placing the sample directly into the measuring apparatus and not using containers to transport the sample to the measuring equipment. Recommendations in this practice provide guidance for immediate use and for storage of samples. Immediate use involves sample storage for periods less than 24 h.1.1 This practice covers the types of and preparation of containers found most suitable for the handling of aviation fuel samples for the determination of critical properties affected by trace contamination. 1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. For specific warning statements, see 5.1, 5.2, 5.3, 5.4, and 5.6.

Standard Practice for Aviation Fuel Sample Containers for Tests Affected by Trace Contamination

HB 20047-2011 航空工業外貿出口產品運輸包裝技術要求

本標準規定了航空工業外貿出口產品運輸包裝（以下簡稱運輸包裝)的技術要求、檢驗要求、運輸包裝件交貨和驗收及回收利用等要求。 本標準適用于航空工業外貿出口產品及為航空工業外貿出口配套的設備、成件、原材料及修理物品的運輸包裝。非航空工業生產的外貿出口產品相關要求可參照?qǐng)?zhí)行。

Technical requirements for shipping packages of export products of the aviation industry

SAE AMS2813G-2011 焊條裝箱的包裝和標識的標準方法

This specification covers spooling and packaging of bare welding wire to ensure cleanliness but with minimum environmental protection, spool sizes and weights of spooled wire, and package weights of cut lengths.

Packaging and Marking of Packages of Welding Wire Standard Method

KS W ISO 1749:2009 航空器.彈性密封圈.包裝和識別

? ??? ???? ????? ?? ?? ??? ? ??? ?? ? ??? ?? ?? ??

Aircraft-Elastomeric sealing rings-Packaging and identification

SAE AIR5558-2009 航天電線制作中的紫外線(UV)激光打標性能

The purpose of this report is to provide information on the results of ultra violet (UV) laser marking and mark contrast measurement of a wide range of aerospace wire and cable constructions, the specifications for most of which do not state specific requirements for laser markability. The contents of this document are for information and guidance only. It is not intended that it be used as the basis for marking process specifications or standards, which are covered by AS5649 Wire and Cable Marking Process, UV Laser.

Ultraviolet (UV) Laser Marking Performance of Aerospace Wire Constructions

SAE AMS2817F-2008 預成型包裝件的包裝和識別

This specification covers procedures which will provide protection of preformed packings, primarily "O" rings of elastomeric materials, from contamination by foreign materials prior to installation and ensure positive identification by part number of each piece until it is installed.

Packaging and Identification, Preformed Packings

WJ 2700-2008 戰術導彈戰斗部運輸要求及試驗方法

Transportation requirements and test methods for tactical missile warheads