GB/T 7345-1994
General requirements for electrical micro machine for automatic control system
2009-04
- Standard No.
- GB/T 7345-1994
- Language
- Chinese
- Release Date
- 1994
- Published By
- General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China
- Replace By
- GB/T 7345-2008
- Lastest
- GB/T 7345-2008
- Scope
- This standard specifies the synchros, rotary transformers, transmission resolvers, induction phase shifters, induction synchronizers, shaft angle encoders, tachogenerators, servo motors, stepping motors, Basic technical requirements, test methods, inspection rules, marking, packaging, transportation, storage, etc. This standard is applicable to the control micromotor with the outer diameter of the frame not greater than 130mm, and the control micromotor with the outer diameter of the frame larger than 130mm should also be used as a reference. This standard should be used together with the general technical conditions for each type of motor and the specific technical conditions for individual motors.
GB/T 7345-1994 history
- 2008 GB/T 7345-2008 Basic technical requirements for motor control
- 1994 GB/T 7345-1994 General requirements for electrical micro machine for automatic control system